Home
Quote
Company Policy
Contact Us
Shipping
800-286-5471
Oodlesofpartsplus.com
Chair Parts
Replacement Parts
Aeron Chair Parts
Arm Pads
Bearing Kit
Bell Washers
Mechanisms-Manual & Gas
Chair Bases Swivel-Metal-Composite
Chair Conversion Kits
Gas Cylinders
Herman Miller Chairs
Hub Liners/Seat Post Bushing
Jury Bases
Lumbar Support
Maintenece/Repair Tools
Steelcase Leap Chair Parts
Steelcase Hub Liner/Bearing Kit
Swivel Plates
Universal Parts-Hardware
Chair Glides
Glides to Replace Casters
Sled Base
Casters
Most Popular
Heavy Duty Single Wheel
Herman Miller Chairs
Safety Casters
Stick on Wheels
Wheel Covers
Caster Inserts/Sockets
Knoll Chadwick
Knoll Chadwick Chair Parts
Herman Miller Parts
Aeron Chair Parts
Mirra Chair Parts
Equa Chair Parts
Conversion Kits
Sayl Chair Parts
File Cabinet Parts
File Cabinet Parts
File Bars & File Rails
File Bars-Lateral
File Rails-front to back
Universal Bars/Hangrails
Hanging File Bracket Clips
File Drawer Dividers
GF (Quantum) Parts
Hanging File Folder Frames
Hanging Plastic Rails
Label Holders
By Mfr
Anderson Hickey
Haworth
Herman Miller Parts
HON Parts
Inscape Parts
Knoll Parts
Montisa Browne Morse
Steelcase Parts
Storwal Parts
File Keys & Locks
File Keys & Lock Cores
Tools-key removal
Multi Drawer Locks Bars
Lock Kits
Pad Locks
Steelcase Lock Parts
Panel / Cubicle Parts
Steelcase
Steelcase CMW
Steelcase CMW/Avenir
Steelcase 9000
Parts & Hardware
Coat hooks
Herman Miller
Ethospace
AO1/AO2 wire mgmt
AO1 & AO2 parts
Panel Hardware
Cubicle Accessories
E-Series Parts
Worksurface Supports
Overhead/Flipper door
Coat hooks
Haworth
Unigroup & Places
Places
Unigroup
Coat hooks
New/ Used/ Cloned
Ethospace
Panel Frames
Panel Connectors
Electrical Conncetors
Worksurfaces
Coat Hook
Shelf Divider
Action Office
Panels
Electrical Distibution
Panel Frames
Panel Connectors
Finished Ends
Flipper Door
GF OPS Parts
OPS Parts
Universal Parts
Universal Parts
Universal Parts
Parts & Access.
T-Molding
Touch up paint
Cubicle coat hooks
Ergonomic Floor Mats
Magnetic Parts
Coat Hooks
Office Accessories
Dividers/Followers
Picture Hangers
Shelves
Brackets
Workstation Brackets
Cantilevers
Concealed Brackets
Furniture Care
Caulking Solutions
Laminate Repair
Misc
Helpful Backsavers
Furniture Movers
Wobble Stopper
Security
File Cabinet Lock Bars
Bookcase Clips
Bookcase Clips
Task Chairs & More
24/7 Heavyweight
Hi-Back
Task
Counterheight
40/4 Stacking
Metal Stacking
Wood Stacking
Upholstered Stacking
Outdoor Stacking
Leather Stacking
Bar / Counterheight
Tablet Arms
Herman Miller
Aeron Chair
Knoll Chadwick
Knoll Chadwick Chair Parts
Stacking Chairs
Plastic
Task Chairs & More
Task Chairs
Conference Chairs
Metro Wire Shelving
Carts
Utility
Deep Ledge Utility
Lab Research
MetroMax i®
Super Adjustable 2™
Heavy Duty Utility
Mobile Wine Cart
Polymer Utility Cart
Cart Covers
Workstations/Tables
Lab Worktables
Heavy Duty Worktables
Gowning Bench
Shelving
Super Erecta 2™
Heavy Duty Solid
Super Erecta Wire
qwikSLOT™
Drop Mat
Erecta
Convenience Pak
Super Erecta Pro™
Designer Shelving
Curve Appeal Display
Stainless Steel Solid
Wall Mounts
Super Erecta Acc.
Storage Systems
Food Service
HD qwikTrak
Wine Storage
Home Office
SmartWall Plus
MetroMax I
MetroMax Iq
MetroMax Iq Acc
Security Storage
Super Adjustable
qwikSLOT
MetroMax Iq
Metro Parts & Acc.
Casters
Shelf Markers
Tote Bins
Shelf Markers
Tote Bins
Starsys Carts
Pre-Configured Carts
Quick Find
Get new product information and more.
Join Our Customer Club
View Cart
We accept
GSA Pricing Available
Herman Miller® Ethospace® Parts
email us for
current pricing
Monorail
This monorail attaches to the top of a frame to mount an adjustable spotlight. D-style vertical storage unit, screen, or toll rail. It is anodized aluminum with cool grey neutral (CL) ends. Attachment hardware is included.
Part # E1267
Available widths:18",24",30",36",42",48"
Frame Top Cap
This cap trims the top of a frame. It has a painted steel, enameled or veneer surface.
Part #E1260
Connector Top Cap
This cap trims the top of a vinyl or fabric covered radius shaped connector or spacer and replaces a standard connector top cap.
Part #E1261
Power Entry External Direct
Connects a buildings electrical supply from a wall, floor or column to the base of an powered frame. Plugs directly into a receptacle location on the frames baseline to distribute up to 4-20 amp circuits. Right hand direction but can be field converted to a left hand direction.
Part # E1322
Available lengths: 6',12',18',24'
Power Entry Internal Direct
Connects a buildings electrical supply from a wall, floor or column to a powered frame. It enters the frame through the ends of the cable management cover and plugs in to the right hand receptacle outlet to a power harness. The power entry includes a 6' cable that can be field cut to the appropriate length.
Part # E1325
Base Power Entry Junction Box
This power entry connects a buildings electrical supply from a wall, floor, or column to the base of a non-powered frame. and distributes up to 4-20 amp circuits. It includes a junction box,1 plain or grooved cable management side cover, and 6' of wire that can be field cut to the appropriate length for connection to the buildings power. Part # E1323
Frame Power Entry
This 4-circuit power entry connects a buildings electrical supply from a floor monument or wall junction box to an adjacent powered frame. It is concealed as it enters the frame and connects to an electrical harness. The power entry includes a 6' cable that can be field cut to the appropriate length.
Part # E1324
Ceiling Power Entry Internal
Connects to a ceilings electrical supply to the base of a frame, either directly or through any connector. It distributes up to 4-20 amp circuits and holds up to 90° 4-pair UTP category 5 cables. The power entry has a 10'-high pole, ceiling and base trim, connecting hardware, conduit and a factory-installed electrical harness. Part # E1331
Power/Cable Entry Cover
This cover conceals power or low-voltage conduits routed from the floor to the cable management tile. It can also be used without the cable management tile. The cover includes 2 floor attachment brackets and 2 trim pieces for closing gaps between the cover and the cable management tile.
Part # E1326
Baseline Harness 4 Circuit
This harness converts a non powered to a frame to a powered frame. It distributes up to a 4-20 amp circuits and provides 2 receptacle locations on each side of the frame.
Part # E1354
Pass Through Harness Frame
This harness extends power from the Ethospace powered frame through a nonpowered or wall section to an adjacent powered frame or wall section.
Part # E1342
Available Lengths: 18",24",30",36",42",48",60"
Pass Through Harness Connector
This harness coverts a nonpowered connector to a powered connector at the base line or beltine and passes power through the connector to an adjacent powered frame. The harness is UL Listed and CSA certified.
Part # E1356
Tile Height Harness
This harness is used with 1 or 2 cable access or cable channel tiles. It distributes up to 4-20 amp circuits, provides 2 receptacle access locations on each side of a frame, and includes a support bar for attaching the harness to a frame.
Part # E1357
Available widths: 24',30",36",42",48"
Power Jumper 4 Circuit
This power jumper connects power from an Ethospace baseline harness to an electrical harness. The connections for both harnesses are at the same connection point as receptacles. The power jumper cannot be used with a glazed window tile, or stacking frame.
Part # E1341
Electrical Bridge 4 Circuit to 4 Circuit
This bridge connects a D-series 4-circuit power harness to an E-series 4-circuit powered frame or connector.
Part #E1370
Vertical Wire Harness Single
This harness is used with a beltline face tile. It carries power from the baseline harness up to the beltline level in consecutive frames. Multiple vertical wire harnesses can connect and carry power from frame to frame.
Part #E1343
Baseline Box Assembly, H-Style Frame
Retrofits H-style electrical. It has a junction box that holds a hard-wired, flexible-conduit electrical system in the baseline of 1 or both sides of the frame. Double-wide, two-sided junction box, 2 blank covers , 2 port covers, cable management side cover w/o cutouts a cable management side cover with receptacles cutouts.
Part # EW400
Harness End Cap
This cap covers the unused end port or side port of an Action Office Series 2, Prospects, Q, or Ethospace electrical harness. It also serves as a visual indicator for the last harness in a series of powered products. Cap is red
Part # G1358
Receptacle 4-circuit 15 Amp
This receptacle locks into the baseline or beltline harness of an Ethospace frame,. A simplex receptacle package contains 1 receptacle; a duplex receptacle package contains 6
Part # E1311
Receptacle 4 Circuit 20 Amp
This receptacle locks into a 4 circuit electrical harness to proved power to equipment with a 20-amp standard plug head or cap. It also accepts 15-amp standard plug heads or caps. The receptacle is UL Listed.
Part #X1311
Tackable Tile
This 16" high tackable tile attaches to 1 side of a frame or to a wall strip to display notes and art .It has a fabric surface.
Part # E1422
Available widths: 24',30",36",42",48"
Acoustical Tile
High sound-reducing tile attaches to 1 side of a frame or to wall strips and has a fabric surface. Available w/ 2 different acoustical ratings: one ahs a Noise Reduction Coefficient (NRC) Rating of.75 and a Sound Transmission Class (STC) rating of 21: the other one has an NRC rating of.80 and STC rating of 23
Part # E1423
Replacement Cover
This cover upholsters a painted face tile or replaces the cover on a fabric-covered face tile, acoustical tile, or tackable tile. It has attachment strips to allow replacement of the fabric. Pkg contains 6 covers of the same fabric color.
Part # E1490 = face tile
Part # E1491= acoustical/tackable tile
Cable Access Tile
8 " high tile attaches to 1 side of a frame of equal width and has a painted, grooved, vinyl, fabric or wrapcoat surface. It cannot be used with wall strips or tile adapters.
Part # E1432 = 2 receptacles locations
Part # E1436 = 2 receptacle locations, 2 communication port locations
Glazed Window Tile
This glazed window tile attaches to 1 side of a frame of equal width, It cannot be used with wall strips, tile adapters, or a 4-ciruit power jumper.
Part # E1411
Available widths: 24',30",36",42",48"
Open Tile Squared Tile
This metal open tile finishes a frame and provides an opening for communicating, sharing equipment, or improving air circulation.Tile finishes both sides of a frame. It cannot be used with a stacking frame or with a 4-circuit power jumper.
Part # E1444
Available widths: 24',30",36",42",48"
Perforated Tile Squares
This perforated metal tile attaches to 1 side of a frame. It has 1/4" square perforation spaced 3/4" apart.
Part # E1441
Counter Top Support
This product supports a square-edge counter top. It cannot attach to veneer connectors or crown or veneer top caps. Attachment hardware is included.
Part # E2827
Available widths: 24',30",36",42",48"
Counter Top Support End Cap
This end cap closes and finishes the end of a counter top support . It has an electrical junction box to end the wiring when an adjacent counter top support with lights is used. The end cap cannot attach to a veneer connector or crown or veneer top cap.
Pkg contains 2 Part # E2829
Ethospace Panel Parts-
Connectors
|
Frames
|
Electrical
|
Worksurfaces