Herman Miller® Action Office® Parts

Action Office replacement parts Finsihed Ends and Connectors

email us current pricing

3-Way 90 connector with wood top cap

This connector joins 3 of equal or unequal heights at 90 angles. It has an enameled or fabric surface, a veneer top cap and a cable management side cover.
Part#NP261

3-Way 90 connector with wood top cap

This connector joins 3 panels of equal or unequal heights at 90 angles. It has an enameled surface and a veneer top cap. The veneer top cap adds 1" to the connector height. Part#NP262

Finished End with wood top cap

This cover finishes the exposed end of a panel. It has a veneer surface and a cable management end cover. The veneer to cap adds 1" to the finished end height.
Part#NP263

Finished End with wood top cap, change of height

This veneer cover finishes the exposed end of a panel or connector between 2 unequal-height panels with wood top caps.
Part#NP264

Panel-to-panel Insert

This insert covers the exposed panel between 2 panels with wood top caps. An insert is required at every panel connection. Finish in black umber.
Part# NP265

Base Power Entry, Direct Connect, 4-Circuit

This power entry connects a buildings electrical supply from a wall, floor or column to the base of an Action Office ® Series 2 powered panel.
Part #A1322

Power Entry, Internal Direct Connect,4-Circuit

This power entry connects a buildings electrical supply from a wall, floor or column to a powered frame. It enters the frame through the end of the cable management cover and plugs into the right and receptacle outlet on a power harness. Part#G1350

Base Power Entry, Junction Box,4 Circuit

This power entry connects a buildings electrical supply from a wall, floor or column to the base of a nonpowered panel and distributes up to 4 20 amp circuits. It includes a junction box, an electrical harness, and an expanded side cover. Part # A1323

Ceiling Power Entry, Internal Direct Connect

This power entry has a 10-1/2' pole that can be filed cut to the appropriate length, ceiling and base trim, and connecting hardware. It is available nonpowered or powered.
Part #A1325

Ceiling Power Entry,4 Circuit, Top Mounted

This power entry connects a ceilings electrical supply to a top-mounted voice/data cable channel or Action Office ® Series 2 panel base. It distributes up to 4 20 amp circuits.
Part #NP239

Base Power Adapter,4-Circuit

This power adapter converts a nonpowered panel to a powered panel. The power adapter with side covers include receptacles fillers or receptacle and communication port fillers.
Part #A1354 -side covers
Part #A1355 no side covers

Receptacle,4 Circuit, 20 Amp

This receptacle locks into a 4-circuit electrical harness to provide power to equipment with 20 amp standard plug head or cap. It also accepts 15 amp standard plug heads or caps.
Part # X1311

Electrical Distributor, 4 Outlet

This electrical distributor attaches to an Action Office ® or Prospects® panel-suspended cable management trough, or the stretcher on an Arrio® work surface. with a 15-amp circuit breaker.
Part # G1313

Electrical Distributor, Multi-Outlet

This electrical distributor attaches to an Action Office ® or Prospects® panel-suspended cable management trough, or an Ethospace® or 5000 Series cable management trough. It also fits in the stretcher on an Arrio® work surface. Part # NP289

Work Surface-Attached Electrical Distributor

This 2-outlet distributor attaches to the back edge of an Action Office ® Series 2 or Prospects® squared edge work surface, Ethospace® work surface without a cable a management trough, Arrio® work surface, or Passage® desk module. Part # G1314

Retractable Power/Communication Module

This module is field installed in a wood-core work surface. It provides work surface-height access for power and/ or communication.
Part #G1340

Covered Grommet

This plastic piece covers the hole created when a retractable power/communication module is removed. It can also be used to create a double module.
Part # G1342

Power Center

This power center mounts under a work surface with cable ports; it can also be filed mounted under an existing Action Office®, Prospects®, or Ethospace® work surface for high-density cable management.
Part # NP359

Faceplates with Cutouts

This faceplate allows voice/data cables to exit from receptacle locations at the cable management base of an Action Office® Series 2 panel or Ethospace® frame, or from an Ethospace frame with a cable access tile.
Part# G1310

Cable Management Trough , Panel Suspended

This black trough attaches to a panel to hold a 4-outlet electrical distributor and to manage cables. It cab be field modified for use with any size panel.
Part #A0381

Cable Management Trough, Work Surface Suspended

This trough attaches under an Action Office® or Prospects® suspended work surface or Arrio® 2-legged corner table desk to manage cables.
Part #A0382

Cable Management Trough, Horizontal/Vertical

This trough is backed with pressure-sensitive tape and attaches horizontally or vertically to a panel or wall to manage cables. Pkg contains 2-10"-3,22" and 8-46"long troughs.
Part #A0383

Replacement Parts

Chair Glides

Casters

Knoll Chadwick

Herman Miller Parts

File Cabinet Parts

By Mfr

File Keys & Locks

Steelcase

Herman Miller

Haworth

New/ Used/ Cloned

GF OPS Parts

Universal Parts

Parts & Access.

Magnetic Parts

Brackets

Furniture Care

Misc

Security

Bookcase Clips

24/7 Heavyweight

40/4 Stacking

Herman Miller

Knoll Chadwick

Stacking Chairs

Task Chairs & More

Herman Miller® Action Office® Parts

Action Office replacement parts Finsihed Ends and Connectors