Welcome to Oodles Of Parts Plus
 

Solution Provider...

Fluid Chair^™
site #516

 GREEN FACTS

Finally. One chair that suits everyone, in any work environment. A stream-lined base design, chrome accents, and a soft, comfortable arm rest, Fluid, designed by Miles Keller provides optimum appeal with breathable, elastomeric, tight weave mesh that distributes body pressure evenly and maximizes air circulation. Comforting too, are Fluid’s options. Head rest, seat depth adjustment, chrome accents
and a virtually unlimited selection of fabrics.
When it comes to office seating, it’s all for Fluid and Fluid for all.
Outstanding Quality

Fluid has a dynamic new look and a dramatically improved ride.

Deluxe Synchro Tilt Mechanism: Who says you can’t please everyone? Multiple position tilt lock with an anti-kickback safety feature, side-activated, telescoping, spring tension adjustment handle and an optional seat slider. The DST mechanism provides an incredibly smooth ride for users of all body types

Synchro Tilt Mechanism: Tilt lock, tension control and seat height adjustment. The ST mechanism allows independent seat and back movement for comfort, whatever the task at hand.

Task 2 Arm: The Task 2 Arm features a dynamic new look with striking silver accents and smooth height adjustability.

Black & White Closed Mesh: Still breathable but smoother. A stylish elastomeric closed mesh that distributes body pressure evenly.

Silver Striped Casters & TVO Base: Sleek silver accented casters and a stream lined base design complete the new look

Deluxe Synchro Tilt Mechanism Adjustments (DST)

1. Seat Slider
In the seated position, lift the lever and slide the seat to  the desired position.
2. Seat Height Adjustment
To increase seat height, lift the lever until desired seat height is reached.
To decrease seat height, sit in chair and lift the lever until desired seat height is reached.
3. Telescoping Tension Control
From the upright sitting position, extend the handle and turn forward to increase the tilt tension. Extend, and turn the handle backward to decrease the tilt tension.
4. Tilt Lock
When you have reached the desired tilted angle, rotate the tilt lock lever backwards to lock the position. To unlock the tilt, from the upright sitting position, turn the tilt lock lever forward and then lean back in the chair to activate the anti-kickback feature and unlock the chair.

FLUID WITH DST MECHANISM ASSEMBLY INSTRUCTIONS
Congratulations on the purchase of your new Fluid chair!
In order to attach the Fluid back with upright to the seat equipped with a DST mechanism,
please read and follow the instructions below.
Please note that you will need a ½” flat or socket wrench (not supplied) to
assemble the back and seat. Place the seat on a sturdy, secure surface with the mechanism facing up and ensure the seat assembly is resting on the front edge of the seat. Insert the Fluid back assembly into the corresponding slot found at the back of the Fluid seat assembly. The upright metal tab must slide under both metal rods. Align the holes in the upright tab with the holes in the mechanism and insert carriage bolts with the heads facing the seat and ends protruding towards the base of the chair. Place the nuts over the bolt ends and tighten them until you feel resistance. Please make sure that the square lead of the carriage bolt is fully inserted into the corresponding square openings in the mechanism.
Tighten the nuts using ½” flat or socket wrench.
Please do not over tighten!